How to Use Your Alloy Home Thermostat

 

Alloythermostat.png

This is a quick guide to show you how to function your new Alloy Home thermostat.    

The Alloy Home is very simple to use as it only has 3 buttons for functionality. The small button located on the right side of the thermostat is the "Select" button, it will also be the button to change your modes, fan modes, view your current temperature, and get to the settings. 

To change the thermostat modes: 

  1. With the screen on, press the side button once.

  2. Using the + and - buttons, to cycle through to the modes: Heat, Cool, Off, and Heat/Cool, which is basically Auto Mode.

  3. Once the mode is on the screen, press the side button again to confirm the switch to that mode.

 

To change the thermostat Fan modes: 

  1. With the screen on, press the side button twice.

  2. Using the + and - keys, cycle through to the desired fan mods: Auto, On, and Circulation. Note: The auto fan mode will read as "Fan", On as On, and Circulation being listed to run for 15 min, 30 min, or 60 min.

  3. Once the desired mode is on the screen, press the side button again to confirm the switch to that fan mode.

 

To change the settings of the thermostat: Hold the "Select" button down for 5 seconds and Settings should appear.

Use the + and to navigate through the settings provided: 

  • Device
  • Configure 

 

If you have any additional questions, please contact our support team via email at [email protected], by phone at (844) 479-1555, or start a live chat with us in the mobile app.